East Hub Development Project, Angola

The East Hub Development Project involves the development of the Cabaça North and Cabaca South-East discoveries located within Block 15 /06, approximately 350km north-east of Luanda, Angola.


Eni operates the Block 15 /06, holding a 35% interest, while the remaining interest is held by Total (15%), Sonangol (15%), SSI (a joint affiliate of Sinopec and Sonangol, 25%), Statoil (5%) and Falcon Oil Angola Investimentos (5%). Total sold its share of interest in the field to Sonangol for a sum of $750m in February 2014. The block was earlier awarded to the partners during Angola's 2006 licensing round.


"The Cabaça North discovery was made in October 2009 with the drilling of the Cabaça Norte-1 well at a water depth of 500m and to a total depth of 2,830m."


Eni approved the final investment decision for the project in November 2013. Major contracts for the project were awarded in 2014 and early 2015, and first production is expected in October 2016.


Discoveries at Angola's Block 15/06 East Hub fields

 

The Cabaça North discovery was made in October 2009 with the drilling of the Cabaça Norte-1 well at a water depth of 500m and to a total depth of 2,830m. It encountered oil pay in sands with excellent reservoir characteristics and produced oil at rates exceeding 6,500 barrels of oil per day (bpd) during production tests.


The Cabaca South-East discovery was made in July 2010 with the drilling of the Cabaca South East-1 well at a water depth of 470m. The well encountered oil-bearing reservoirs of the Miocene age, having total gross thickness of 450m.


Eni further appraised the Cabaca South-East discovery in October 201 by drilling the Cabaça South East-2 well at a water depth of 470m. The well flowed high-quality 34° API oil at rates of approximately 7,000bpd, increasing the initial estimate of the discovery's reserves by at least 30%.


Eni's East Hub reserves

 

Combined oil reserves of the two discoveries are estimated at approximately 230 million barrels. A peak production capacity of approximately 17,000bpd net is expected to be achieved from the project in 2017. The start of production from the field will increase the production level at Block 15/06, which also accommodates the West Hub Development Project, to 200,000bpd.


East Hub Development Project details

 

The first phase of the three-phased project involves the development of the Cabaça South-East discovery where ten subsea wells will be drilled. The Cabaça North discovery will be developed in the next phase, increasing the total number of subsea wells to 23.


Kaombo Ultra-Deep Offshore Project, Angola


Kaombo Ultra-Deep Offshore Project involves the development of six of the 12 fields discovered at Block 32 around 260km offshore Luanda, Angola.


The project will also involve the development of nearby discoveries, such as the Lira discovery, in later stages for which further detailed studies are expected to be made.


The host platform for the project will be a leased FPSO, which is being converted from the Armada Ali Very Large Crude Carrier (VLCC) tanker (formerly MT Osprey VLCC). The conversion project is scheduled for completion in the second quarter of 2016.


FPSO for Eni's Angolan offshore field

 

The FPSO will have a designed crude oil production capacity of 80,000bpd, and a storage capacity of 1.8 million barrels and 120,000bpd of water injection and 120 million standard cubic feet per day (mmscfd) of gas handling capacities.


The living quarters of the vessel will provide accommodation facilities for 100 people, and will be moored at a water depth of 450m using an external turret mooring system. The vessel's topsides alone would weigh approximately 15,000t.


Contractors involved with the Angolan offshore project

 

The contract for the chartering, operation and maintenance of the FPSO was awarded to a consortium of Bumi Armada Offshore Holdings (BAOHL, a wholly-owned subsidiary of Bumi Armada) and Angoil Bumi JV (ABJL, a joint venture of BAOHL, Angoil Exploracao Petrolifera and Cosmarg Limitada) in August 2014. The RM9.6bn (approximately $2.9bn) contract was awarded in August 2014.


Keppel Shipyard, a wholly-owned subsidiary of Keppel Offshore & Marine (Keppel O&M), is performing the FPSO conversion works. Dynamac was awarded a $60m contract in February 2015 to fabricate six topside modules for the FPSO vessel.


FMC Technologies will supply the subsea production systems for the project under a contract worth $393m.


Cathelco is supplying a fore and aft impressed current cathodic protection (ICCP) system to protect the FPSO's hull against corrosion. The system will integrate a control panel wired to two Cathelco C-Max disc anodes and reference electrodes mounted on port and starboard of the FPSO.


Two diesel-hydraulic driven fire water pumps, each with a capacity of 2.900m³ an hour at 12-bar discharge pressure, and two in-house diesel generators for the FPSO will be supplied by Fischcon.

Subscribe To Our Newsletter

Security Q:How many eyes has a typical person? (ex: 1)
Name:
Email: